Rockstar DENSE STONE SEALER is a solvent-based penetrating sealer used to protect against staining on dense, hard to permeate stones and tiles, such as Granite, Bluestone, Porcelain tiles and Polished Concrete.
USES
DENSE STONE SEALER protects dense stone and tile substrates against environmental staining. The ingress of staining substance is retarded, making the surface easier to clean.
BENEFITS
- Excellent oil and water repellency
- Excellent penetration in the most densesubstrates
- Does not change the surfaceappearance
- Does not inhibit the water-vapourpermeability
- Rapid curing
- UV Stable
PROPERTIES
Appearance and colour………………………………….Colourless to yellowish, clear to hazy liquid
Specific Gravity (Water = 1) …………………………..0.82 g/ml
Boiling Point ………………………………………………..120 – 200oC
Solubility in Water ………………………………………..Not miscible
Flash Point ………………………………………………….30oC
APPLICATION INSTRUCTIONS
- Ensure the surface to be sealed is free of excess grout and grout haze, is dry and free of any oils and other surface contaminants.
- Apply DENSE STONE SEALER using a lambswool applicator or low pressure hand sprayer. Ensure the surface is fully saturated without leaving pools of sealer. Apply a second coat once the first coat has dried (approximately 2 hours).
- The product will cure in 12-24 hours depending on atmospheric conditions.
COVERAGE
Coverage is dependent on the permeability of the stone or tile and is in the range of 6-15 Mt2 per Litre / 50 -150ft2 per Quart.
PRECAUTIONS
- Do not allow pools of liquid DENSE STONE SEALER to dry on the surface.
- Avoid contact with skin and eyes by wearing suitable protective gloves and eyewear.
CLEANING
Clean all equipment with mineral turpentine.
PACKAGING
DENSE STONE SEALER is available in 1, 5, 20 Litres Containers / 1 Quart / 1.32Gal / 5Gal.
STORAGE
Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children.
Keep away from sources of heat, spark and ignition, product is flammable.
SAFETY
Classified as Hazardous according to criteria of Worksafe Australia. For further detailed information refer to the Safety Data Sheet.
DISCLAIMER
The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.