BLUESTONE SEALER

Rockstar Sealing

BLUESTONE SEALER

Sale price$88.48
Size:1L
Quantity:
Pickup available at 6185 North Conquistador Street Usually ready in 24 hours

BLUESTONE SEALER

1L

6185 North Conquistador Street

Pickup available, usually ready in 24 hours

6185 North Conquistador Street
Las Vegas NV 89149
United States

7027782272

 



Rockstar Bluestone sealer has been formulated using the latest in stone sealing technology.

Penetrating sealer for bluestone and basalt that doesn’t alter the appearance of the stone. It offers high stain resistance to water and oil based contaminants.

Description

Rockstar BLUESTONE SEALER is a high-performance penetrating sealer which does not alter the appearance of the Stone. Developed for all Bluestone and Basalt tiles.

USES

Application of BLUESTONE SEALER onto bluestone pavers enhances the stain resistance of the bluestone surface without changing the colour or texture of the stone.

Rockstar BLUESTONE SEALER is ideal for Australian and Asian sourced stone.

BENEFITS

  • Excellent oil and water repellency, and stain resistance
  • Does not change the look of thestone
  • Does not inhibit the water-vapourpermeability
  • Rapidcuring
  • UV Stable

PROPERTIES

Appearance and colour………………………………….Colourless to yellowish, clear to hazy liquid
Specific Gravity (Water = 1) …………………………..0.83 g/ml
Boiling Point ………………………………………………..120 – 200oC
Solubility in Water ………………………………………..Not miscible
Flash Point ………………………………………………….30oC

APPLICATION INSTRUCTIONS

  1. Ensure the surface to be sealed is free of excess grout and is dry and free of any oils and other surface contaminants.
  2. Apply BLUESTONE SEALER undiluted by lambswool applicator or low pressure hand sprayer. Ensure that the surface is fully saturated without leaving pools of material.
  3. Apply a second coat once the first coat has dried (2-4 hours).
  4. The product will cure in 12-24 hours depending on atmospheric conditions.

COVERAGE

Coverage is dependent on the permeability of the stone or tile and is in the range of 10-15 Mt2 per Litre/50-150 ft2 per Quart.

PRECAUTIONS

  1. Do not allow pools of liquid BLUESTONE SEALER to dry on the surface. Remove excess liquid with a clean, lint-free cloth.

  2. Avoid contact with skin and eyes by wearing suitable protective gloves and eyewear.

CLEANING

Clean all equipment with mineral turpentine.

PACKAGING

BLUESTONE SEALER is available in 1, 5 and 20 litre Containers / 1 Quart / 1.32Gal / 5Gal.

STORAGE

Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children.

Keep away from sources of heat, spark and ignition, product is flammable.

SAFETY

Classified as Hazardous according to criteria of Worksafe Australia. For further detailed information refer to the Safety Data Sheet.

DISCLAIMER

The advice and information contained herein is based on our best knowledge of the product. We believe the information to be accurate and reliable as at the date supplied, but no representation, guarantee or warranty, expressed or implied, is made to the accuracy, reliability, or completeness of the advice and information. We urge persons receiving this advice and information to make their own determination as to the advice and information’s suitability and completeness for their own particular situation. When in doubt it is always prudent to perform a trial on a scrap section of material, or inconspicuous section of the job to ascertain the products suitability.


TECHNICAL DATA SHEETS

Please access the product information sheet and Material Safety Data Sheet (MSDS) below:

Bluestone Sealer Technical Data Sheet

Bluestone Sealer Safety Data Sheet